Astronaut Floating in Space - HueForge

This is a filament painting of an astronaut floating through space. It was made by using Midjourney. Printed at 240x114 @ 3.12mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PrintBed Black Overture Orange Polymaker Teal PrintBed White

Swap Instructions: Black until layer #7 at 0.64mm Aqua Blue until layer #14 at 1.2mm Orange until layer #18 at 1.52mm White for the rest.